Basic model LBAS High Rigidity・Compact・Low Cost

Rigidity

High

Payload

2kg to 100kg

Speed

300 to 1,333
mm/sec

Straightness

+/-0.02/800 mm

Request Brochure

Motor-less Single Axis Actuator Basic model Slider type LBAS
Newly designed integrated guide rail/frame structure. Improved moment load capacity in compact frame size. Designed to accommodate motors from most leading manufacturers.

Features

01High Rigidity

Moment rigidity is increased approximately three times from current models.

02High Precision

Straightness (running parallelism):+/-0.02/800 mm

03Compact

Frame width is reduced by approximately 20% from current models

04Motor attaching direction, Easily changeable with the special bending part

05Installation process is simple and easy

1.Mounting holes are accessible from top or bottom without disassembling actuator unit.
2.Standard surface on the side and dowel pin holes on the bottom.

06Easy Maintenance

Moving parts can be lubricated from outside without opening actuator

Specifications

Model	Adaptable motor （W）	Repeatability （±mm）^{Note 1}	Deceleration mechanism	Stroke （mm）	Maximum speed (or equivalent) ^{Note 2} （mm/sec）	Ball screw lead （mm）	Maximum payload (or equivalent) ^{Note 3} （kg）		Rated thrust (or equivalent) ^{Note 3} （N）	Maximum dimensions of cross section of main unit（mm）	Overall length （mm）	Using ambient temperature and humidity
Model	Adaptable motor （W）	Repeatability （±mm）^{Note 1}	Deceleration mechanism	Stroke （mm）	Maximum speed (or equivalent) ^{Note 2} （mm/sec）	Ball screw lead （mm）	Horizontal	Vertical	Rated thrust (or equivalent) ^{Note 3} （N）	Maximum dimensions of cross section of main unit（mm）	Overall length （mm）	Using ambient temperature and humidity
LBAS04PDF (614KB)	50	±0.01	Shifting position ball screw φ10 (C7 class)	50～800 (50 mm pitch)	800 400	12 6	12 20	2 5	71 141	Ｗ44 × H 52	ST+214	0 to 40°C, 35 to 80%RH (non-condensing)
LBAS05PDF (601KB)	100		Shifting position ball screw φ12 (C7 class)	50～800 (50 mm pitch)	1333 666 333	20 10 5	12 24 40	3 6 12	84 169 339	W 54 × H 60	ST+220.5
LBAS08PDF (657KB)	200		Shifting position ball screw φ16 (C7 class)	50～1100 (50 mm pitch)	1200 600 300	20 10 5	40 80 100	8 20 30	174 341 683	W 82 × H 78	ST+278
LBAS12PDF (853KB)	200		Shifting position ball screw φ16 (C7 class)	50 ～1250 (50 mm pitch)	1800 1200 600 300	32 20 10 5	20 40 80 100	3 8 20 30	105 170 341 683	W 120 × H 76	ST + 294

Note1. Size is the approximate cross sectional size.